Tumble Dryer Cost Calculator: Cost Per Load and Per Year

TL;DR: Tumble Dryer 2,800W × 1.5h = 4.20 kWh/day = $0.67/day, $16.13/month, $193.54/year at $0.16/kWh — formula ▸
kWh = watts ÷ 1000 × hours
cost = kWh × rate per kWh
2800 ÷ 1000 × 1.5 = 4.200 kWh/day
4.200 × 0.16 = $0.67/day
PeriodEnergyCost
Per hour2.800 kWh$0.45
Per day4.20 kWh$0.67
Per month (24 days)100.8 kWh$16.13

Source: ProEnergySaver, calculated at $0.16/kWh (US average). Rates cross-checked against EnergyStar, DOE and Ofgem published figures.

Vented, condenser and heat pump dryers per load and per year. Adjust the wattage, runtime and your own electricity rate below — every figure updates instantly in your browser, and nothing you type is sent anywhere.

Your inputs

Common presets

How this cost is calculated

The formula is kWh = watts ÷ 1000 × hours, then cost = kWh × your rate per kWh. Standing charges and tiered or time-of-use pricing are billed separately by your supplier, so treat these numbers as the marginal cost of running this appliance rather than a full bill.

For the full breakdown with regional price tables, read the detailed guide, or estimate your whole household on the home electricity bill calculator.

Frequently asked questions

How much does one tumble dryer load cost?

About $0.48-$0.72 for a standard dryer and $0.24-$0.40 for a heat pump model at $0.16/kWh.

Are heat pump dryers worth it?

They use 40-50% less energy per load, saving roughly $100-$150 a year for a family doing six loads a week.

Does a higher spin speed cut drying cost?

Yes. Spinning at 1400 rpm instead of 1000 rpm removes more water and can shorten drying time by 10-20%.

Power saving devices: do electricity saving boxes actually work?

Does Power Saver Pro electricity saving box actually save electricity?

No. For fake plug-in boxes (StopWatt, Power Saver Pro), savings will be 0 kWh ($0.00) because they do not reduce active power. Residential meters only measure active power (kWh), so improving power factor at home changes nothing on your utility bill. For legitimate power-saving devices (smart power strips, programmable thermostats, timers), use Daily kWh Reduction = (Original Watts x Original Hours - New Watts x New Hours) / 1000, and Monthly Savings ($) = Daily kWh Reduction x 30 Days x Utility Rate per kWh. Example: a TV setup (TV, soundbar, game console) drawing 30 Watts on idle/standby for 20 hours a day is 0.60 kWh/day = $2.88/month at $0.16/kWh. A water heater saving 500W x 1.5h is 0.75 kWh/day = $3.60/month. Verify real-world consumption with a physical power meter such as a Kill A Watt meter.

Is StopWatt energy saving device scam or legit how much does it save?

StopWatt is a complete scam. It saves exactly $0.00. Testing by consumer protection agencies shows it slightly increases your bill because the internal LED draws power. Red flags: "Stabilizes voltage & power factor" (false for residential billing), "Cleans dirty electricity" (marketing buzzword), "Endorsed by Elon Musk / Shark Tank" (100% fake deepfakes), "Cuts bills by 60%" (independent teardowns show only a cheap capacitor and an LED inside). Real savings come from adjusting the thermostat, lowering the water heater to 120°F (49°C), and using smart power strips to eliminate phantom standby loads.

To price a genuine saving, use Daily kWh = Watts × Hours ÷ 1000 in the Real kWh Savings Calculator.

Want regional price tables, savings tips, and worked examples for this appliance?

Read the full guide →

More cost calculators

Compare six more common household energy costs.

Browse all calculators →